home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 25
/
Cream of the Crop 25.iso
/
faq
/
preak.zip
/
PBXINFO.ZIP
/
PBX.CHN
next >
Wrap
Text File
|
1994-05-25
|
6KB
|
110 lines
ZDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD?
CBDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDB4
33 CHiNA CHiNA 33
33 R.O.L.M. Sorcerer XII PBX Remote System Control 33
33 33
33 By: The Conflict 33
CADDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDA4
0DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDY
INTRO : I know right off you people are thinking, "How in the Hell
do I know if I am calling a R.O.L.M. Sorcerer XII PBX?".
Well, that will be covered here, along with all system
commands available on that PBX.**Of course, this file is
meant for educational purposes only. We at CHiNA hereby
waive any legal reprimand due to misuse of the information
contained in this file (so there!).**
HOW : A R.O.L.M. Sorcerer XII PBX has a unique answer; thus, it
IT is quite distinguishable from most other PBX's. I will list
SOUNDS some PBX's with similar answer devices at the end of this
section. The Sorcerer XII's answer consists of: A.) No
ring, B.) A short diverting tone of 2600 Hz, and C.) A
standard, no interrupt AT&T 4.2c dial tone. Unfortunately,
there are four known PBX's that have a similar answer device,
but not exact. These four are as follows: A.) R.O.L.M.
Sorcerer III, B.) SouthWestern Bell WizSys I, C.) Northern
Telecom SL-Net V, and D.) Siemans WebLink v.Ia. The slight
differences between these systems answer devices are the
dial tones. The dial differ either in tone, volume, or
interrupt/no interrupt. With practice, you will find the
Sorcerer XII easy to distinguish.
WHAT : Now, most often Sorcerer XII requires a four digit code, but
TO DO this can be altered at the source, so it is not entirely
consistent. To be able to utilize the Remote System Control
(RSC from here out) commands, you must obtain the System
Command Code. The System Command Code consists of the
original number of digits plus a two digit authorization
check. Thus, if we were dealing with a four digit Sorcerer
XII system, we would find the four digit System Command Code
followed by two more digits. *How do you know if you have the
first set of the SCC?* A four tone confirmation, similar to
the one given by ASPEN VMNetworks, is given when you have the
first digit set of the SCC; then, you must discover the two
digit confirmation code. The confirmation code is updated
every week. Finding the SCC is not going to be easy, as you
can not utilize a cutesy code hacker on your computer.
Essentially, the process will take dedicated hand hacking,
and scanning for that matter.
SYSTEM: Since this is a PBX, there are no voice instructions; thus,
COMMAND you must know what the hell you're doing! After you have
LEVEL obtained the correct confirmation code, two short beeps are
transmitted. This is your cue; you're in! The commands are
two digits followed by the asterisk (*) key. Since there are
many commands, I will list only those which are essential to
your life and needs. You can experiment with the other ones.
07* - input 1, 2, or 3; alters error transmission. 1 is fake
carrier, 2 is fast-busy, 3 is sweep-siren.
19* - allows removal of codes from the programed code array.
You must enter the code to be removed, followed by the
pound key (#).
20* - allows insertion of codes. You must input the code,
followed by the pound key (#). Be careful, as a
precise log of all code insertions is kept.
43* - enables calls to toll numbers, such as 0700, 1900, and
976.
44* - disables calls to toll numbers. Be sure to disable
the function immediately after you are done with it.
If it is left on, the administrator knows what's going
on and will investigate.
73* - enables making log of all calls placed through Sorcerer
XII lines.
74* - disables making log of all calls placed through
Sorcerer XII lines. Once again, disable 73 if you use
it, as it is obvious to the administrator what's going
on.
99* - disconnect from the system command level. Make sure
to do this before hanging up, as it will hang the PBX,
and things will definantly be switched around.
Have fun, be careful, and take it easy. All the information included
should be enough to provide hours of safe enjoyment. If you have any
questions for CHiNA concerning anything, give us a call at one of the
below-listed CHiNA Nodes. Spread this around!!!
Later,
The Conflict
<CHiNA>
Thanks go out to Maxwell Smart for acquiring a partial R.O.L.M.
manual; Count Zero for being a swell guy; The Viper for giving us a
'home'; Monalisa Overdrive for anti-procrastination support; and last
but not least, NAP/PA for instilling in us a realization that we do
not want to do nothing!
/e
+- Shamelessly Leeched from The Mudd Club -+